Brass Woven Wire Mesh

Material
Brass
Hole Type
Square / Rectangular
Mesh Size (per inch)
Fine Mesh
Surface Finish Coating
Mill Finish
Applications / Usage
Industrial applications
Min order Quantity
1 Roll
Packaging Details
Rolls / As per client’s requirement.

Brass is an alloy of copper and zinc and has improved resistance to abrasion and corrosion. Compared to copper, Brass has low electrical conductivity and is frequently used in sieving diversified pellets, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas. The chemical composition of brass is 60-70% copper plus 30-40% zinc. Brass is superior to copper in abrasion resistance and tensile strength, but electrical conductivity of brass wire is considerably lower than that for copper wire. Brass mesh can be bent by hand and effortlessly cut with tin snips and a common scissor.

Brass Woven Wire Mesh or wire cloth is technically wire mesh panel accurately manufactured by woven to size in the same technique cloth is woven manufactured on a loom. It is particularly useful because it works perfectly with hot or cold liquids, is extremely chemical resistant, and can be easily cleaned. Brass Woven Wire netting is normally woven on looms, like looms that are normally used to weave cloth. Usually, any specification that is 5 x 5 Mesh and finer is a woven wire mesh. However, in this case, wires, not yarn, are used to produce wire mesh. The loom terms—heddles, reeds, and bobbin—are the same. Because the pre-straightened wires are welded at the intersections, relatively thinner diameter wires can be used over larger spaces. The mesh itself will remain strong and stable with a high percentage of open area. Different patterns such as plain weave, twilled weave, and plain dutch weave are made on these types of weaving looms

Brass Woven Wire Meshes are exceptionally multipurpose and adaptable and easy to install, and are used in numerous applications. Heavier Brass Woven Wires must be pre-crimped as the material rests stable and rigid after the crimping process. Whereas pre-crimped Brass Woven Wire mesh is ideal for both industrial & architectural applications.

Brass Woven Wire Mesh is available in different sizes and wide-range can be customized to fit your exact specifications in order to meet your specific application requirements.

Brass Woven Wire Mesh

Features

Where it does the work.

Brass Woven Wire Mesh is widely used for machine guarding, architectural grilles, fencing, display shelves and stands, liquid filtration, air filtration, handrail panel inserts, filters, baskets, wall reinforcement, application of strainers, sieves and separators.

Industries we supply.

All 30 industries
Which weave patterns can brass woven wire mesh be made in?

Plain weave, twilled weave and plain Dutch weave are all made on our looms. Brass wire takes the place of yarn, and the loom terms (heddles, reeds, bobbin) stay the same. Usually any specification of 5 x 5 mesh and finer is woven.

What holes and mesh size does brass woven wire mesh have?

Holes are square or rectangular, and the mesh is listed as fine, in mill finish. Heavier brass wires are pre-crimped so the cloth stays stable and rigid. We supply it in rolls, with a minimum order of 1 roll.

What is brass woven wire mesh used for?

Strainers, sieves, separators, baskets and liquid and air filtration are the main uses. It also goes into machine guarding, architectural grilles, display shelves and handrail panel inserts. The cloth works with hot or cold liquids and cleans easily.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.