Wire mesh calculator

Enter a mesh count and a wire diameter to get the aperture, the open area and the weight of the mesh.

Calculator

Start from
Piece or roll size (optional)

40 mesh, 0.254 mm wire, stainless steel

pitch 0.635 mmaperture 0.381 mmwire 0.254 mm
Drawn in proportion, not to size.
Aperture381 microns
0.381mm
Open area
36.0%
Weight per m²Stainless steel, approx.
1.290kg
Total weightAdd a piece size
–kg
Get Quote

How the figures are worked out

Browse wire mesh
Aperture
25.4 ÷ mesh count − wire diameter
In millimetres: the clear opening between two wires.
Open area
(aperture ÷ pitch)² × 100
A percentage. Pitch is the aperture plus one wire.
Weight per square metre
mesh count × wire diameter² ÷ 2
In kilograms, for stainless steel wire in millimetres.
Other metals
weight × metal density ÷ 7.9
Scaled by density, against stainless steel at 7.9 g/cm³.

The figures are for plain square weave with one wire diameter in both directions, and the weight is an estimate. Dutch weaves, rectangular openings and welded mesh are worked out differently: send us the specification.

How does the wire mesh calculator work out the aperture?

Aperture = 25.4 ÷ mesh count − wire diameter, in millimetres. It is the clear opening between two wires. For 40 mesh with 0.254 mm wire, the calculator gives an aperture of 0.381 mm, which is 381 microns.

How is the open area of wire mesh calculated?

Open area = (aperture ÷ pitch)² × 100, as a percentage. Pitch is the aperture plus one wire diameter. For 40 mesh with 0.254 mm wire, the pitch is 0.635 mm, the aperture 0.381 mm and the open area 36.0%.

How do I calculate the weight of wire mesh per square metre?

Weight per square metre = mesh count × wire diameter² ÷ 2, in kilograms for stainless steel wire in millimetres. For 40 mesh with 0.254 mm wire this gives approx. 1.290 kg. For other metals, multiply by the metal's density and divide by 7.9. The weight is an estimate.

Does the mesh calculator work for Dutch weave or welded mesh?

No. The figures are for plain square weave with one wire diameter in both directions. Dutch weaves, rectangular openings and welded mesh are worked out differently, so for those, send us the specification instead.

Note: sizes, specifications and pictures on this site are for guidance only. They vary with the product, grade and application, so please confirm the details of your order with us.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.